DIY Ring Display

What you will need:

Picture frame, close to 1inch thick. This frame fits a 5x7inch photo.

Fabric of your choosing, some fabrics are too busy, but i liked this one, i used a material that is thicker than cotton but not stiff like canvas. I cut this piece 6x18inches. 

Foam hair rollers. I bought mine from the dollar tree, you can choose larger rollers of smaller rollers, i went with the black 10count smaller rollers, i used almost two packages. 

*You may possibly need a hot glue gun for If the back of the frame pulls off.

If you cut enough fabric and use enough rollers for a tight tuck, then you shouldnt need the glue gun for much.*

Start putting it together:

Prepare the foam rollers by taking the plastic frames off and leaving one inside stick for every two rollers.

Insert them snug into the frame. I used 14 rollers, at least two packages of the 10 count rollers.

When tucking in the fabric, be sure to touch the fabric to the back of the frame between each roller and the edges of the frame.

And there you have it, a frame display for your rings! I have found that straight back earings fir nicely in this as well as the rings. :) 

Enjoy! Happy crafting! ;p